Brady BP-PR 300 PLUS Series User Manual download pdf (Page 5)

____________________________________________________________________________________________________________________________

USA Canada Mexico

Technical Support: 1-800-643-8766 Technical Support: 1-888-262-7576 Technical Support: 1-866-748-4424

www.BradyID.com www.BradyCanada.ca www.BradyLatinAmerica.com

• Close the “Windows Explorer” window

• The driver is now fully removed.

Step 2 – Install latest BP-PR Plus Series®

Printer Driver onto your computer

STOP! – Do not connect the USB cable to the PC or printer until you have been instructed to do so.

Install via Windows® XP:

1. Install IP Series®

Printer Driver:

If the driver file has been downloaded from the Bradyid.com website, unzip the file to a known location on your PC

Insert the provided CD into your CD-ROM drive.

2. Plug in the USB cable and power on your BP-PR 300/600® printer. Follow through the New Hardware Wizard by

following the instructions on the next few steps below.

3. Select "No not at this time" and click <Next>.

4. Select "Install from a list or specific location (Advanced)" click <Next>.

5. Ensure that “Search for the best driver in these locations.” Is selected, Check “Search removable media (floppy, CD-

ROM…) if using driver disc - OR - check “Include this location in the search” if using the downloaded driver package.

Click <Browse> and then select the unzipped driver folder and then click <OK>. Once the driver location is selected

click <Next>

6. If prompted with a message about Windows Logo Testing, click <Continue Anyway> and finish the New Found

Hardware Wizard.

7. If successful, the BP-PR 300/600® printer should show up Start >Settings (if applicable)>Printer and Faxes. If the

printer is not there, follow the previous steps for removal of the driver and try again.

8. Configure the Driver Settings (If on a Network):

• To configure the security settings select Start >Settings (if applicable)>Printer and Faxes.

• Right-Click on the BP-PR 300/600® printer driver and select <Properties>

• Click on the <Security> tab (If you do not have a security tab you can close this window and skip the rest of

these steps)

• Ensure that <Allow> is checked for the Print, Manage Printer, Manage Documents

Congratulations! Your BP-PR Plus®

Printer Driver is now properly installed and the system is

ready to print labels through your labeling software installed on your PC.

Install via Windows® 7:

1. Install IP Series®

Printer Driver:

If the driver file has been downloaded from the Bradyid.com website, unzip the file to a known location on your PC

and then run the file PrinterInstall.exe

1 2 3 4 5 6

No comments

Brady BP-PR 300 PLUS Series User Manual Page 5