Brady Wraptor User's Guide Page 65

  • Download
  • Add to my manuals
  • Print
  • Page
    / 72
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 64
Manually shuttle the slide track forward until the back/inside oiler is exposed.
8. Inspect and add a few drops of light machine oil to each oiler as needed.
9. Close the side door.
7.2.2 Clean and Re-grease the Wrapper Hub
1. Press the Load Labels button on the Setup tab menu. This shuttles the printer to the “shuttle-back”
position.
2. Power off and unplug the Wraptor.
WARNING: You must power off and unplug the Wraptor
prior to performing any cleaning or maintenance!
3. Open the front (clear) door on the Wraptor.
4. Clean the two surfaces of the “V” on the wrapper hub with a soft, lint-free cloth or a clean swab dipped
in isopropyl alcohol.
5. Apply high pressure grease to a soft, lint-free cloth or a clean swab.
6. Using the greased cloth or swab, apply a very thin layer of grease to the wrapper hub as you rotate it.
Make sure not to get any grease in the opening of the hub.
7. Close the front door.
Figure 40. Clean and Grease Wrapper Hub
58 Wraptor™ User’s Guide
Page view 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 71 72

Comments to this Manuals

No comments