Brady Wraptor User's Guide Page 9
- Page / 72
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
1.4 Technical Specifications
The Wraptor has the following specifications:
300 dots per inch (11.8 dots per mm) print resolution
1.75 inches per second (44.45 mm per second) print speed
The following wrap speeds:
4 seconds (apply only)
4.5 seconds (wrap and apply)
Accommodates wires between 0.060” (1.524 mm) min. and 0.600” max. (15.24 mm) without
adjustment
Supports labels up to 2” (50.8 mm) wide
Support for labels from 0.75” (19.05 mm) min. to 3.0” (76.2 mm) max. height. (1.625” max.
printable height)
One-year Warranty
Accepts CompactFlash Memory Cards for added storage capability and standalone operation
1.4.1 Physical Dimensions
Physical Metric Units U.S. Units
Dimensions (width, height, depth) 381 x 458 x 572 mm 15 x 18 x 22.5 in
Weight 36 kg 80 lb
1.4.2 Environmental Ranges
Environmental Operation Storage
Temperature* 50 to 105°F (10 to 41°C) 0 to 140°F (-18 to 60°C)
Relative Humidity 20 to 80% non-condensing 10 to 95% non-condensing
*Exposing the Wraptor to direct sunlight is not recommended.
1.4.3 Materials Storage Specifications
CAUTION: Consumable material for use with this unit must be stored in its original
packaging in an environment in which the temperature is below 80
o
F and 60%
Relative Humidity.
1.4.4 Electrical Specifications
Input Voltage 100 - 240 V~
Current 2A
Frequency 50/60 Hz
1.4.5 Power Cord Specifications
Users in countries outside of North America may be required to supply their own power cord for connecting
the system to an AC electrical outlet. Choose an AC power cord and plug that is suitable for the country in
which the equipment is to be installed. The AC power cord and plug must meet all national regulations and
requirements for that intended country.
2 Wraptor™ User’s Guide
- User’s Guide 1
- Copyright 2
- Regulatory Information 3
- Brady Warranty 3
- Wraptor™ User’s Guide III 4
- Table of Contents 5
- Table of Figures 7
- Chapter 1 Introduction 8
- 1.4 Technical Specifications 9
- Wraptor™ User’s Guide 3 10
- Chapter 2 Safety 11
- 2.2 Electrical Safety 12
- 2.3 Warning Labels 12
- 3.1 External Parts 13
- Wraptor™ User’s Guide 7 14
- 4.1 Initial Setup 15
- 10 Wraptor™ User’s Guide 17
- Wraptor™ User’s Guide 11 18
- 12 Wraptor™ User’s Guide 19
- Wraptor™ User’s Guide 13 20
- IP Address Option 21
- 14 Wraptor™ User’s Guide 21
- Printer Name Option 22
- Wraptor™ User’s Guide 15 22
- 16 Wraptor™ User’s Guide 23
- 4.2 Load Label Material 24
- 18 Wraptor™ User’s Guide 25
- Wraptor™ User’s Guide 19 26
- 20 Wraptor™ User’s Guide 27
- Wraptor™ User’s Guide 21 28
- 22 Wraptor™ User’s Guide 29
- 4.3 Load the Printer Ribbon 30
- 24 Wraptor™ User’s Guide 31
- Wraptor™ User’s Guide 25 32
- 26 Wraptor™ User’s Guide 33
- Adjustment for Wire Bundles 34
- Wraptor™ User’s Guide 27 34
- 5.2 Using the Touch Screen 35
- Figure 12. File Tab Menu 36
- Wraptor™ User’s Guide 29 36
- Open Command 37
- 30 Wraptor™ User’s Guide 37
- 5.3.2 Run Tab Commands 38
- Figure 15. Goto… Dialog 39
- 32 Wraptor™ User’s Guide 39
- Figure 16. Setup Tab Menu 40
- Wraptor™ User’s Guide 33 40
- Figure 17. Adj Tab Menu 41
- 34 Wraptor™ User’s Guide 41
- Advanced Settings Menu 42
- Advanced Settings Commands 42
- Wraptor™ User’s Guide 35 42
- Figure 20. Config Tab Menu 43
- Connection Type 43
- Operating Modes 43
- 36 Wraptor™ User’s Guide 43
- File Location 44
- Remote Control 44
- Figure 21. IP Tab Menu 44
- Wraptor™ User’s Guide 37 44
- Entering Text 45
- 38 Wraptor™ User’s Guide 45
- Description of Settings 46
- Wraptor™ User’s Guide 39 46
- 40 Wraptor™ User’s Guide 47
- Wraptor™ User’s Guide 41 48
- 42 Wraptor™ User’s Guide 49
- 5.5 Power Off 50
- 44 Wraptor™ User’s Guide 51
- Wraptor™ User’s Guide 45 52
- 46 Wraptor™ User’s Guide 53
- Wraptor™ User’s Guide 47 54
- 48 Wraptor™ User’s Guide 55
- Wraptor™ User’s Guide 49 56
- Chapter 7 Maintenance 57
- Wraptor™ User’s Guide 51 58
- Figure 33. Clean Printhead 59
- 52 Wraptor™ User’s Guide 59
- Figure 34. Clean Rollers 60
- Wraptor™ User’s Guide 53 60
- Figure 35. Clean V-Rollers 61
- 54 Wraptor™ User’s Guide 61
- Wraptor™ User’s Guide 55 62
- 6. Close the unit doors 63
- 7.2 Lubrication 64
- 58 Wraptor™ User’s Guide 65
- Wraptor™ User’s Guide 59 66
- 60 Wraptor™ User’s Guide 67
- Chapter 8 Error Messages 68
- 62 Wraptor™ User’s Guide 69
- Wraptor™ User’s Guide 63 70
- 64 Wraptor™ User’s Guide 71
- 9.1 Consumable material 72
- 9.2 Accessories 72
Related products and manuals for Label printers Brady Wraptor
Label printers Brady LabelMark 3 User Manual
(84 pages)
(84 pages)
Label printers Brady 203X-PLUS User's Guide
(110 pages)
(110 pages)
Label printers Brady 200M-e 300 Specifications
(118 pages)
(118 pages)
Label printers Brady 1024 User's Guide
(55 pages)
(55 pages)
Label printers Brady 2024 User's Guide
(89 pages)
(89 pages)
Label printers Brady 260M User's Guide
(104 pages)
(104 pages)
Label printers Brady POWERMark Specifications
(128 pages)
(128 pages)
Label printers Brady Handi User Manual
(1 pages)
(1 pages)
Label printers Brady 1024 Operator's Manual
(82 pages)
(82 pages)
© 2020, manymanuals.com. All rights reserved. | 0.223 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals